Mineral hydraulic fluid.
FLUID PO 6 is particularly suited to the requirements of Public Works equipment, as well as all equipment that is operating outdoors.
Oxidation resistance: ensures the fluid’s shelf life, thus allowing draining time intervals without danger to the equipment.
Heat stability: allows operation at temperatures over 60°C without the risk of rapid deterioration of anti-wear additives (as is the case with traditional fluids).
Resistance to hydrolysis: Most fluids deteriorate in water by forming varnishes that seal the filters. FLUID PO 6 eliminates this risk and remains stable, even in water. (Stabilized zinc formulation).
Filterability: FLUID PO 6 remains filterable in water, and only the impurities are captured in the filter. There is no risk of depleting additives.
High viscosity index: limited viscosity variation, based upon the temperature guaranteeing good operability when cold and good greasing when hot.
Highly resistant to shearing: good resistance to shearing ensures viscosity stability over time.
Low pour point: lowers lower use limits.
The ISO grade is adhered to throughout the service.
Silicone lubricant for all mechanical or other parts, thanks to its strong penetrating power.