unilopal.v2 - 26 queries. 0.333 seconds.

Industry

Parce que nous sommes au cœur du mouvement, le département Recherche & Développement d’UNIL OPAL conçoit spécialement pour vous une gamme de lubrifiants et d’huile industrielle répondant aux contraintes techniques de toute industrie et assurant le bon fonctionnement des machines.

HUILES HYDRAULIQUES
UNIL OPAL fabrique une gamme d’huiles hydrauliques anti-usure, spécialisée dans la lubrification des systèmes hydrauliques fonctionnant à très haute pression et nécessitant une filtrabilité performante. Leur exceptionnelle résistance au cisaillement prolonge les intervalles de vidange et permet de conserver l’indice de viscosité.

HUILES DE MAINTENANCE
UNIL OPAL propose une gamme d’huiles de maintenance conçue pour la lubrification et la protection des différents éléments et organes des machines (engrenages, broches, glissières, compresseurs).

SPECIALITES
Découvrez notre large gamme d’aérosols et de produits de nettoyage. De même, nous avons élaboré des huiles idéalement formulées pour le travail des métaux et l’industrie agroalimentaire.

GRAISSES INDUSTRIELLES
Les graisses industrielles commercialisées par UNIL OPAL permettent l’entretien de nombreuses pièces ou organes de vos machines industrielles. Elles sont spécialement formulées pour résister aux températures extrêmes, aux charges importantes ainsi qu’au délavage par l’eau.

MATERIELS
Gamme recommandée par UNIL OPAL pour faciliter le travail du personnel et l’entretien de votre production au quotidien (aspirateur de fûts, bacs de rétention,…).

  • ouvrir

    Ep grease for food contact homologated nsf h1. POLYFOOD is an Extreme Pressure grease for food contact formulated with complex calcium soap and mineral white oil. All its components are approved by the FDA for food contact and POLYFOOD is homologated NSF H1.

    Conditioning : 1 KG, 5 KG, 50 KG, 180 KG

  • ouvrir

    Long-life synthetic grease. POLYGREASE is a high-technology grease made from a polyurea thickener, an entirely synthetic base oil and selected additives intended for very long term lubrication of roller/ball bearings and journal bearings, or of ball/roller bearings that operate at very low or very high temperatures or are subject to high industrial loads.

    Conditioning : 1 KG, 18 KG, 180 KG

  • ouvrir

    Ep grease for food contact homologated nsf h1. POLYFOOD is an Extreme Pressure grease for food contact formulated with complex calcium soap and mineral white oil. All its components are approved by the FDA for food contact and POLYFOOD is homologated NSF H1.

    Conditioning : 5 KG

  • ouvrir

    High temperature graphite grease. HT 300 is a high-temperature grease, able to be used up to 300°C in devices which operate at slow
    speed and high load (bearings, pins) or in a severe atmosphere :
    Ovens, mixers, ventilator bearings and other mechanisms exposed to high temperatures
    Drying bobbins in the textile industry, autoclaves, conveyor belt bearings working in water, in acids
    or in bases.

    Conditioning : 1 KG, 5 KG, 18 KG, 53 KG

  • ouvrir

    Lead free antisticking paste with copper for metallic assembly.
    CUPROMIX is an assembly lubricant composed of a Benton grease, in which extremely fine particles of copper are dispersed.
    The CUPROMIX forms on the threaded parts a protective film, which fixes like a seal and actually protects against corrosion.
    At high temperatures, CUPROMIX is recommended to lubricate: threads, turbo-compressors, oven transport systems, ventilators, steam valves, steam drive flange bolts, turbines, cylinder heads and engine exhaust collectors, brake plaquettes and linings. CUPROMIX can be also used in corrosive conditions to lubricate different components of agricultural engines, lifting machines and in chemical industry.

    Conditioning : 1 Unite

  • ouvrir

    Extreme pressure grease for food contact. Formulated from components meeting the requirements of FDA § 21 CFR 178.3570, ALUFOOD 2 is
    designed for the lubrication of loaded conveyors bearings, sleeve bearings submitted to high
    temperature, chains, crimpers...

    Conditioning : 1 KG, 53 KG, 190 KG

  • ouvrir

    Mineral hydraulic fluid FLUID PO 6 is particularly well adapted to the requirements of Civil Engineering equipment.

    Conditioning : 5 L, 25 L, 60 L, 220 L, 1000 L, VRAC L

  • ouvrir

    Hydraulic safety fluid iso-l-hfc category iso grade 46. HYDRO FIRE 8546 is strongly recommended for all hydraulic units operating near heat sources or highly inflammable materials, in particular where there is a risk of accidental leakage of pressurised hydraulic fluid.

    Conditioning : 60 L, 205 L, 1000 L

  • ouvrir

    Ultra fluid lubricants for high speed movements. The BROCHE MS are superior, ultra fluid oils to lubricate and protect all high and very high speed movements.
    Thanks to specific additives, the BROCHE MS have anti-wear and extreme pressure properties (grades ISO VG 5 and 10), as well as excellent demulsibility performances.

    Conditioning : 25 L, 60 L

  • ouvrir

    Ultra fluid lubricants for high speed movements. The BROCHE MS are superior, ultra fluid oils to lubricate and protect all high and very high speed movements.
    Thanks to specific additives, the BROCHE MS have anti-wear and extreme pressure properties (grades ISO VG 5 and 10), as well as excellent demulsibility performances.

    Conditioning : 5 L, 25 L, 60 L, 220 L

  • ouvrir

    100% synthetic lubricant for chains. Can be used in industry, machine shops. It is particularly suitable for clean and easy lubrication of chains, hinges, bolts, springs, locks, joints, sheathed cables (Bowden), slides, small gears, etc. SYNTECHAIN S is not miscible with mineral oils or synthetic oils based on polyalphaolefins (PAO).
    Operating temperature range: - 25 ° C to + 220 ° C

    Conditioning : 25 L, 220 L

  • ouvrir

    Lubricant specially developed for the timber industry, to lubricate saw blades and planer. LUBSCIE GREEN also prevents wood resin deposits on the blades, which will keep its own equipment.

    Conditioning : 25 L, 208 L, 1000 L

  • ouvrir

    Zinc free hydraulic fluid category iso-l-hm - iso grade 46 and 68. HYDRO S is suitable for all hydraulic systems requiring a zinc free fluid, including vane, screw or gear pumps and operating up to 350 bar pressure. HYDRO S can also be used for lubrication of moderately loaded spur gears.

    Conditioning : 60 L, 220 L, 1000 L, VRAC L

  • ouvrir

    Zinc free hydraulic fluid category iso-l-hm - iso grade 46 and 68. HYDRO S is suitable for all hydraulic systems requiring a zinc free fluid, including vane, screw or gear pumps and operating up to 350 bar pressure. HYDRO S can also be used for lubrication of moderately loaded spur gears.

    Conditioning : 25 L, 220 L, 1000 L, VRAC L

  • ouvrir

    Additive for cleaning hydraulic systems. HYDRO NET is a specially formulated supplement to dislodge gums and varnishes from hydraulic systems, and disperse them in the operating fluid.

    Conditioning : 5 L, 25 L

  • ouvrir

    Hydraulic fluid for use at low temperatures. HYDRO BT is a hydraulic fluid recommended for all equipments working at very low temperatures,
    especially for lifting systems of handling trucks and fak lift trucks in refrigerating plants, freezing
    storages...

    Conditioning : 25 L, 60 L, 208 L

  • ouvrir

    Security type hydraulic fluid hfa. Highly recommended for all hydraulic installations operating in an environment where fire risk exists (near heat sources or highly flammable materials), especially in case of accidental leakage of pressurized hydraulic fluid.

    Conditioning : 220 L

  • ouvrir

    Oils movements and general machinery applications. Fluid power in moderate requirements. Oils MOTION MOP good properties of adhesion mechanisms.

    Conditioning : 220 L

  • ouvrir

    Circulating oil iso grades 22 to 460. FLUID M is particularly well suited to low-severity hydraulic systems, notably in machine-tools, not exceeding 150 bar pressure.
    FLUID M is a circulating oil which can also be used for overall lubrication, notably of bearings and of lightly-loaded gears.
    FLUID M, in grades ISO 46 to 320, is recommended for lubrication of vacuum pumps. The ISO grade 32 is particularly recommended for COMPAIR screw compressors.

    Conditioning : 5 L, 25 L, 60 L, 220 L

  • ouvrir

    Oils movements and general machinery applications. Fluid power in moderate requirements. Oils MOTION MOP good properties of adhesion mechanisms.

    Conditioning : 60 L, 220 L, 1000 L, VRAC L