unilopal.v2 - 18 queries. 0.439 seconds.

Metal Working

Parce que la finalité même d’une huile est la garantie d’une lubrification et du refroidissement optimal des machines.
Parce qu’une huile prolonge la durée de vie des outils coupants et aide à l’évacuation des copeaux.
Parce qu’une huile de qualité préserve la santé des opérateurs.
UNIL OPAL imagine pour vous des lubrifiants adaptés à vos différentes opérations d’usinage réalisées dans des conditions sévères.

HUILES D’USINAGE
UNIL OPAL propose une gamme complète d’huiles de coupe entières ou solubles, assurant la lubrification et le refroidissement des outils coupants lors des opérations d’usinage et garantissant une sécurité maximale pour les utilisateurs des machines.

HUILES POUR DEFORMATION DU METAL
Découvrez notre large gamme d’huiles entières et solubles conçue par UNIL OPAL et parfaitement adaptée pour la déformation des métaux. Qu’il s’agisse d’emboutissage, de profilage, de découpage, de poinçonnage ou de cambrage, UNIL OPAL vous apporte une réponse adaptée à votre opération.
Découvrez également nos huiles évanescentes inodores, destinées aux opérations courantes sur métaux en feuille, assurant un séchage rapide en ne laissant aucun résidu perceptible sur le métal.

HUILE DE PROTECTION
Gamme complète d’huiles fabriquées par UNIL OPAL, assurant une haute protection des pièces usinées en interopération ou lors des phases de stockage de courte ou longue durée.

PRODUITS COMPLEMENTAIRES
UNIL OPAL propose une gamme de produits complémentaires, indispensable au bon entretien de vos machines : aérosols, graisses, produits nettoyants, ainsi qu’une gamme de matériels, destinée à faciliter le travail de personnel et l’entretien de votre production au quotidien : aspirateur de fûts, bacs de rétention…

  • ouvrir

    Lubricant without chlorine, very great characteristics of creaminess, insoluble, specially designed for cutting, stamping and spinning on strips of steels and ferritic and austenitic stainless steels. Anti-wear and extreme pressure agents.

    Conditioning : 25 L, 60 L, 220 L, 1000 L

  • ouvrir

    Entire oil, very great characteristics of creaminess, insoluble, specially designed for cutting operations end. Anti-wear and extreme pressure agents.

    Conditioning : 60 L, 220 L, 1000 L

  • ouvrir

    Neat oil for severe tooling. COUPE TF 9 is oil with a medium viscosity, of red colour, odourless, specially formulated for difficult tapping of stainless steels and soft steels.
    COUPE TF 9 enables to reach a remarkable surface state and to reduce wear and tear of taps and threading dies.

    Conditioning : 1 Unite, 5 Unite, 25 Unite, 60 Unite, 220 Unite

  • ouvrir

    Entire oil lubricity characteristics very large, insoluble, specially designed for cutting operations end. In addition to cutting operations end for which it was designed, highly advanced characteristics of FORM P 29 also confer other potential applications such as deep drawing of sheet metal, steel profiling, drawing .

    Conditioning : 220 L, 1000 L

  • ouvrir

    Cold forming lubricant. Oil for very difficult work of metals by cold forming, stamping, stretching, shrinking.

    Conditioning : 220 L, 1000 L

  • ouvrir

    Complete oil cold forming of metals. Special cold rolling and stretching oil tubes and bars
    alloyed steel. It is also suitable for cold forming operations such as deep drawing and cold heading.

    Conditioning : 220 L

  • ouvrir

    Chlorine-free cutting lubricant designed for all operations difficult removal type cutting chips, turning, dressing, planing, threading, tapping, drilling, drilling, reaming and broaching on steels and non-ferrous metals, copper, aluminum and their alloys.

    Conditioning : 220 L

  • ouvrir

    Chlorine-free cutting lubricant designed for all operations difficult removal type cutting chips, turning, dressing, planing, threading, tapping, drilling, drilling, reaming and broaching on steels and non-ferrous metals, copper, aluminum and their alloys.

    Conditioning : 220 L, 1000 L

  • ouvrir

    Chlorine-free cutting lubricant designed for all removal operations such cutting chips, turning, dressing, planing, drilling, threading and tapping on cutting steels, alloy steels, stainless steel and cast iron.

    Conditioning : 5 L, 25 L, 220 L, VRAC L

  • ouvrir

    Biodegradable synthetic fluid for machining metals such as milling, sawing, tapping. KUTILUB BIO 6675 is used in micro-spray.

    Conditioning : 5 L, 60 L

  • ouvrir

    Chlorine-free cutting lubricant designed for all removal operations such cutting chips, turning, dressing, planing, drilling, threading and tapping on cutting steels, alloy steels, stainless steel and cast iron.

    Conditioning : 220 L, 1000 L

  • ouvrir


    Neat cutting oil Chlorine specially designed for all chip removal operations (of cast iron, steel, alloy steel and refractory) such as deep drilling, drilling, reaming, threading and tapping.

    Conditioning : 220 L, 1000 L

  • ouvrir

    Electro-erosion fluid for transparent finish, odorless, for refrigeration and disposal of micro-chips in the machining operations spark. KUTILUB ER 1 allows all EDM operations, including superfinishing.

    Conditioning : 60 L, 220 L

  • ouvrir

    Electro-erosion fluid for roughing. Liquid specially designed for machining ELECTRO-EROSION providing, by design, good cooling of the electrode and the workpiece, good extraction of micro particles, good focus the electrical discharge and thus a better machining efficiency.

    Conditioning : 60 L, 220 L

  • ouvrir


    Entire oil correction and micro-machining. Very low viscosity lubricant specially designed for grinding operations and micro turned carbides, steels, copper and aluminum. KUTILUB CAR 5 was formulated with white oils.

    Conditioning : 25 L, 220 L

  • ouvrir

    Synthetic fluid high performance, allowing for roughing and finishing operations on EDM machine.
    KUTILUB ER 3S suitable for any type of electrodes (graphite, tungsten, copper alloys).

    Conditioning : 60 L, 205 L

  • ouvrir

    Chlorine-free cutting lubricant designed for all difficult removal operation type chips cutting, turning, dressing, planing, threading, tapping, drilling and grinding, polishing, grinding and cutting to the grindstone.

    Conditioning : 5 L, 25 L, 220 L, 1000 L

  • ouvrir

    Oil lubricity characteristics very large, insoluble, specially designed for the cold working of metals, and who has NOT CHLORINE. The very high characteristics of HSC 65 FORMING also confer other potential applications such as deep drawing of sheet metal, steel forming, stretching.

    Conditioning : 220 L

  • ouvrir

    Chlorine-free cutting lubricant designed for difficult cutting operations, threading / tapping, deep drilling, drilling and reaming of copper, aluminum and their alloys.

    Conditioning : 220 L, 1000 L

  • ouvrir

    Cutting lubricant designed for all removal operations of the type of chip turning, turning, planing, thread and thread; as well as drilling, deep drilling, drilling and boring; and milling, broaching, size drill.

    Conditioning : 220 L